Filter
Top Products
- 21 -
Camera Display Area: It shows the connected camera(s)
within the same network.
Double click the IP Address, it will link to the Camera’s Web
Configuration page.
- Change IP: Click this button to bring up the following
window. It allows you to change the IP Address. You can
select either Static IP or click DHCP. Then, enter the
Administrator ID & Password. By default the ID/Password
is: admin. When complete, click Change.
- Search: Click this button to search the connected
SecurView camera(s) in the same network.
- Exit: Click this button to exit the program.