Filter
Top Products
- 38 -
- Static IP: Select this option to assign the IP address
for the camera directly. You can use IPSetup to
obtain the related setting values.
IP Enter the IP address of the camera. The
default setting is 192.168.10.30.
Subnet
Mask
Enter the Subnet Mask of the camera.
The default setting is 255.255.255.0.
Default
Gateway
Enter the Default Gateway of the camera.
The default setting is 192.168.10.1.
Primary/
Secondary
DNS
DNS (Domain Name System) translates
domain names into IP addresses. Enter
the Primary DNS and Secondary DNS
that are provided by ISP.
- PPPoE: Select this option when you use a direct
connection via the ADSL modem. You should have a
PPPoE account from your Internet service provider.
Enter the User Name and Password. The camera
will get an IP address from the ISP as starting up.
NOTE Once the camera receives an IP address from the
ISP after starting up, it automatically sends a
notification email to you. Therefore, when you
select PPPoE as your connecting type, you have to
set up the email or DDNS configuration in advance.
DDNS Setting: With the Dynamic DNS feature, you can
assign a fixed host and domain name to a dynamic
Internet IP address. To set up the DDNS:
1. Select the Enable option to enable this feature.
2. Select the Provider from the pull-down list.
3. Enter the required information in the Host Name,
User Name, and Password boxes.