TRENDnet TV-IP851WIC Security Camera User Manual


 
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP851WC / TV-IP851WIC
41
Certifications
CE, FCC
Requirement
Management
Interface
Internet Explorer 7.0 or higher
Firefox 3.5 or higher
Safari 4.0 or higher
To Run software
Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
Windows Server 2000, 2008
SecurView Software
Channel: supports up to 32 cameras
Record/Playback/Motion Detection/Audio
Network Protocols
IPv4, ARP, TCP, UDP, ICMP
DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client
HTTP
PPPoE
UPnP
Wireless
Standard
IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n
Frequency
2.4 ~ 2.497 GHz ISM band
Antenna
1 x detachable 2dBi dipole antenna (Reverse-SMA connector)
Date Rate
802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
Security
64/128-bit WEP, WPA/WPA2-PSK
Output Power
802.11b: 18dBm (typical)
802.11g: 15dBm (typical)
802.11n: 15dBm (typical)
Receiving Sensitivity
802.11b: -85dBm at 11Mbps
802.11g: -76dBm at 54Mbps
802.11n: -65dBm at 150Mbps
Channels
1~11 (FCC), 1~13(ETSI)
Management
Accounts
Up to 64 user accounts
Remote Login
Remote management supported
Backup / Restore
Save/retrieve configuration files
Settings
Image
Brightness, contrast, saturation, , flip, mirror (horizontal/vertical)
Video Setting
Encoding: MJPEG
- Resolution: 640 x 480 (20 fps), 320 x 240 (30 fps), 160 x 120
- Max frame rate: VGA@20fps, QVGA@30fps, QQVGA@30fps
- JPEG quality: Very Low, Low, Medium, High, Very High
Recording
event based (motion detection) and scheduled
Snapshot
Trigger event: motion detection
Action: send alert email and/or upload to FTP
Real time snapshot
Port Settings
HTTP port: 80 (default)
Time
Synchronize with NTP server or set time / date manually