103
Using a Memory Card
E
❍ About the AF-Assist Lamp:
When recording still images with flash, the AF-assist lamp (white LED) lights up
responding to the brightness of the subject to enable the camcorder to focus
more accurately. The AF-assist lamp lights up when you focus manually while
the PHOTO button is pressed halfway and turns off after a short time.
- The camcorder may not be able to focus even though the AF-assist lamp is
lighting.
- The AF-assist lamp lights up brightly. Consider turning off the AF-assist lamp
in public places such as in restaurants or theaters.
-Turn off the AF-assist lamp in places where flash photography is prohibited.
Using the Optional VFL-1 Video Flash Light
You can also use the optional VFL-1 Video Flash Light with stronger flash. The
procedure for selecting the flash mode is the same as for the built-in flash. For
instructions on connection and use, refer to the instruction manual of the VFL-1.
❍ The practical range of the flash is approx. 3.3 to 14.8 ft. (1 to 4.5 m). The
range depends upon the recording condition.
❍ The built-in flash does not fire when the POWER switch of the VFL-1 is set to a
position other than OFF.
❍ In (red-eye reduction, auto), the VFL-1 fires a pre-flash for red-eye reduction.
For the red-eye reduction mode to be effective, the subject needs to look at the
flash.