Unibrain Fire-i 501/511/601/701/702/810 Operation Manual Page 11
2.1.3. Fire-i 702b Specification
Features
Image Sensor
2/3” Interline CCD (ICX285AL)
Effective Pixels 1,450,000 pixels 1392(H) x 1040(V)
Picture Size 1392x1040, 1280x960, 1024x768, 800x600, 640x480, 320x240
Cell Size 6.45um x 6.45 um
Real Frame Rate
15, 7.5, 3.75, 1.875 / Y8, Y16
20 (1388 x 1040, Format 7 mode 0)
35 (1388 x 520, Format 7 mode 0)
37(688 x 516, Format 7 mode 1 2x2 binning)
37(1384 x 516, Format 7 mode 2 1x2 binning
Lens Mount C Mount
Scanning System Progressive System
Binning 2x2, 1x2
Format 7 Partial Scan (Unit: 4x4)
Trigger
Edge Rising Edge or Falling Edge
Mode 0, 1, 2, 3, 4, 5, 12, 13, 14, 15
Source External Trigger (Photocoupler) or Software Trigger
Strobe Active High, Support Normal Mode or Trigger Mode
Multi-camera auto sync -144 us ~ +144 us at 15, 7.5 frame rate
Memory Save/Load 16 Channels (0:factory, 1~4:feature, 5~15:mode/feature)
One-shot/Multi-shot 65535 Shots
Control Functions
Brightness, Sharpness, Gamma, Auto-Exposure, Auto-Shutter, Pan/Tilt,
Shutter, Gain
SIO (RS-232) IIDC v1.31 version : Path through or custom command
Frame Delay from Read-out Min. 106us
Digital Interface / Transfer Rate IEEE 1394 port (6pin) / 400 Mbps
Gain 0 ~ 25 dB
Shutter Speed 1 usec ~ 3600 sec (auto or manual control)
Data Depth 12 bit
S/N Ratio 56dB or better
Supply Voltage & Power 8 VDC ~ 30 VDC – Less than 3 Watt (@12V DC)
External Dimension / Weight 64(W) x 64(H) x 60(D) mm / Approx 300g
Operation Temp.
-5°C to 45°C
Storage Temp
-30°C to 60°C