Filter
Top Products
10
2. The monitor displays the Uniden title
screen and then displays the live view.
Power Up the Camera
1. Connect one end of an AC adapter to the camera’s power pigtail and plug the other
end into a 120 volt AC (standard indoor) power outlet.
2. Cameras provided in the kit are already paired to the monitor. Once they are powered
up, the monitor displays images from that camera.
3. Adjust the camera viewing position if needed.
If... Try this...
there is no camera
picture
Verify that the power supply adapter for the
camera(s) is plugged in.
the picture quality is poor Clean the camera lens.
a white image appears at
night
The camera’s infra-red LED shines invisible light
that reflects off surfaces such as glass, causing
white light. Place the camera on the other side of
windows with the lens flush against the surface to
improve the night vision, or place the camera in a
well-lit area.