Uniden UDW10055 Security Camera User Manual


 
4
Getting Started
Connect the Power
1. Connect the standard AC adapter to the receiver’s power input.
2. Attach an antenna to the rear of each camera and connect an
AC adapter to the camera’s power input pigtail. (If necessary,
connect the extension cord to the camera’s pigtail and connect
the AC adapter to the extension cord.)
3. Connect the other end of
each adapter to a 120 volt
AC (standard indoor)
power outlet, and press
the
POWER
button on the
side of the receiver.
4. Make sure
the
Power status
lights on the front of the receiver
and each camera all turn on.
If... Try...
a
Power status
light doesn’t
come on
- reconnecting the AC adapter
- seeing if the power outlet is
controlled by a wall switch
POWER
button
AC
Adapter
Antenna
AC Adapter
OK
Power status
lights