Filter
Top Products
- 11 -
Installing the Battery Pack
The camera is powered by a rechargeable lithium-ion battery (NP-40).
1. Slide the battery cover open.
2. Install the battery with the terminal facing
inside the camera.
3. After making sure the battery pack is properly
installed, slide the battery cover closed.
Low Battery Indicator
A low battery indicator
appears on the LCD
screen when the battery is nearly exhausted.
The battery should be replaced promptly when
the low battery indicator appears.
Charging the Battery Pack
The battery is not charged when you purchase the camera. You need to charge the battery
before using the camera.
1. Place the battery pack in the charger with the
label facing up.
2. Connect the AC adaptor to the charger, and
then plug it into a power outlet.
yThe charger lamp lights red and battery
charging begins. When charging is
completed, the lamp becomes green.
NOTE:
yUse only the special NP-40 rechargeable lithium-ion battery to power this camera.
yRemove battery from the camera if you will not be using the camera for a long time.
yNormal charging time is about 230 minutes. Charging time is varying with current battery
capacity and charging conditions.
yDuring charging both charger and battery pack get hot, this is normal.