Filter
Top Products
VIVOTEK
12 - User's Manual
The sophisticated 3-axis mechanism design offers very exible, easy hardware installation for
either ceiling or wall mount.
Completion
1. Align the inner side of the black cover with the notch on both sides of the lens, x the black
cover.
2. If you choose to the feed the cable through the ceiling/wall, arrange the cable neatly through
the cable hole. If you choose to feed the cable from the side, remove plate B.
3. Attach the dome cover to the camera as the direction shown below. With idiot-proof
mechanism design, the dome cover cannot be attached if the angle does not t. You will hear
a crisp sound when the dome cover is assembled successfully.
4. Finally, make sure all parts of the camera are securely installed.
3-axis Mechanism Design
Pan 350°
Rotate 350°
Tilt Adjustment Screw
DO NOT over rotate the lens.
Doing so will damage the
camera lens module.
2
1
B
3
Be aware of the cable route!
FD8133: Tilt 85°
FD8134: Tilt 70°