Vivotek FD8133 Security Camera User Manual


 
VIVOTEK
126 - User's Manual
protocol_maxmegaco
nnection
<positive integer> 0/7 The maximum megapixel streaming
connections.
protocol_rtp_multicast
_scalable
<boolean> 0/7 Indicate whether to support scalable
multicast.
protocol_rtp_multicast
_backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support RTP over TCP.
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over HTTP.
protocol_spush_mjpe
g
<boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of available
resolution separated
by commas>
0/7 Available resolutions list.
videoin_maxframerate <a list of available
maximum frame rate
separated by
commas>
0/7 Available maximum frame list.
videoin_codec <a list of available
codec types
separated by
commas>
0/7 Available codec list.
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_beginchannel 1 ~ 14 0/7 Indicate the begin channel of wireless