Filter
Top Products
VIVOTEK
User's Manual - 111
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 Enable automatic daylight saving time in time
zone.
daylight_dstactual
mode
1~4 6/7 Check if current time is under daylight saving
time.
(Used internally)
daylight_auto_beg
intime
string[19] 6/7 Display the current daylight saving start time.
(product dependent)
daylight_auto_end
time
string[19] 6/7 Display the current daylight saving end time.
(product dependent)
daylight_timezone
s
string 6/6 List time zone index which support daylight
saving time.
updateinterval 0,
3600,
86400,
604800,
2592000
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
Restore 0,
<positive integer>
7/6 Restore the system parameters to default
values after <value> seconds.
Reset 0,
<positive integer>
7/6 Restart the server after <value> seconds if
<value> is non-negative.
restoreexceptnet 0,
<positive integer>
7/6 Restore the system parameters to default
values except (ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to the default value
except for a union of the combined results.
restoreexceptdst 0,
<positive integer>
7/6 Restore the system parameters to default
values except all daylight saving time settings.