Filter
Top Products
VIVOTEK
User's Manual - 77
Preference
On this page, you can tune the White balance, Image adjustment and WDR enhanced �
White balance: Adjust the value for the best color temperature.
■ You may follow the steps below to adjust the white balance to the best color temperature.
1� Place a sheet of paper of white or cooler-color temperature paper, such as blue, in front of the lens,
then allow the Network Camera to automatically adjust the color temperature�
2� Click the On button to Fix current value and confirm the setting while the white balance is being
measured�
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5.
■ Sharpness:
Adjust the image sharpness level, which ranges from -3 to +3�
You can also select
Customize and manually enter a value�
■ Enable low light compensation: Select this option in low light mode, and the values of sharpness and
brightness will change automatically as the noise reduction function�
Sensor Setting 2:
For special situations
Sensor Setting 1:
For normal situations