Filter
Top Products
VIVOTEK
User's Manual - 51
Video
This section explains how to congure the video settings of the Network Camera.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video�
Color: Select to display color or black/white video streams�
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights� Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect�
Video orientation: Flip--vertically reect the display of the live video; Mirror--horizontally reect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
to correct the image orientation. Please note that the preset locations will be cleared after ip/mirror.
Maximum Exposure Time: Select a proper maximum exposure time according to the light source of
the surroundings. Shorter exposure times result in less light. The exposure times are selectable for the
following durations: 1/30 second, 1/15 second, and 1/5 second�
Overlay title and time stamp on video: Select this option to place the video title and time on the video
streams�
Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be
stamped on the video streams�
Video Title
Title and Time
Video 13:44:17 2011/05/13
2011/05/13 13:44:17