Filter
Top Products
VIVOTEK
User's Manual - 143
deleteallow Remove allowed IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
deletedeny Remove denied IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the
“subgroup of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):