VIVOTEK
User's Manual - 177
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/7 Indicate whether to support
HTTP tunnel for UART
transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode
of the machine: TX = server,
Rx = receiver box, Both =
DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
derivative_brand <boolean> 0 0/7 Indicate whether to support
the upgrade function for the
derivative brand. For
example, if the value is true,
the VVTK product can be
upgraded to VVXX.
(TCVV<->TCXX is excepted)
npreset 0, <positive
integer>
256 0/7 Number of preset locations
eptz 0, <positive
integer>
0 0/7 A 32-bit integer, each bit can
be set separately as follows:
Bit 0 => stream 1 supports
ePTZ or not.
Bit 1 => stream 2 supports
ePTZ or not.
The rest may be deduced by
analogy
nanystream 0, <positive
integer>
1 0/7 number of any media stream
per channel
iva <boolean> 0 0/7 Indicate whether to support
Intelligent Video analysis
tampering <boolean> 0 0/7 Indicate whether to support
tampering detection.
test_ac <boolean> 1 0/7 Indicate whether to support
test ac key.
version_onvifdaemon <string> 1.7.0.13 0/7 Indicate ONVIF daemon
version
localstorage_manageable <boolean> 0 0/7 Indicate whether manageable
local storage is supported.