Filter
Top Products
31
4.3 Setting the Flash mode
When you start to take a picture, press the joystick left to switch
between Flash modes.
See the table below for a detailed description and symbol of each
Flash mode.
Note: This function will be activated only when you are taking a picture.
Icon Description
Flash is turned off.
Auto flash, fires only when needed.
Force flash, flash is always on.
Slow sync flash
4.4 White balance
Use this option to correct color for different lighting conditions.
Turn on the camera and then press the joystick right to select from
Auto, Daylight, Cloudy, Tungsten, or Fluorescent. (Each press
will just change the mode one at a time.)
4.5 Using the zoom function
This function works in both Capture and Video modes.
To control the zoom function press the T (Zoom in) button which
gets closer to the subject, or W (Zoom out) button which moves
away from the subject.
The zoom bar on the LCD screen indicates the zoom status.