●Approximate Operating Time (when fully charged)
Number of recordable images
LCD monitor ON LCD monitor OFF
Playback time
With the flash
fired for 50% Approx.130 Approx.160
Approx.75 min.
of the shots
Without the flash
Approx.160 Approx.200
* The above table is based on Pentax measuring conditions and may vary
depending on capture mode and shooting conditions.
Performance of the battery may deteriorate in low tempera-
tures.
●Battery Level Indicator
You can check the battery level by the symbol displayed on
the LCD monitor.
(lit green) : Adequate power remains.
↓
(lit green) : Battery is running low.
↓
(lit yellow) : Battery is running very low.
↓
(lit red) : Battery is exhausted.
↓
[Battery depleted] : After the message is displayed, the camera
will turn off.
Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC2 (optional) is recom-
mended.
z Connect the AC plug cord to the AC adapter.
x Plug the AC plug cord into the power outlet.
c Open the terminal cover of your camera and connect the
AC adapter to the DC input terminal.
When using the AC adapter, the battery level indicator is not dis-
played on the LCD monitor.
• Make sure that the camera is turned off before connecting
the AC adapter.
• When using the AC adapter D-AC2, be sure to read the
operation manual accompanying the AC adapter.
13
Getting Started
12
Getting Started
Terminal cover
AC adapter
AC plug cord
KB320(01-17)E.QE33 9/12/01 2:27 PM Page 12
