A SERVICE OF

logo

Open as PDF
next previous
Hardware options installation 55
5. Remove the expansion board.
Installing an expansion board
1. Power down the server ("Powering down the server" on page 24).
2. Extend the server from the rack, if applicable ("Extending the server from the
rack" on page 25
).
3. Remove the access panel ("Removing the access panel" on page 26
).
4. Remove the PCI riser board assembly ("Removing PCI riser board assembly"
on page 27
).
5. Remove the expansion slot cover from the PCI riser board assembly.
6. Align the expansion board with the guiding groove.
7. Press to release the expansion board retainer clip.