Filter
Top Products
Network Video Server User’s Manual
Seyeon Tech Co., Ltd
25
2.3 PC Environment
Check out whether your PC is connected to LAN or WAN network or stand-alone. If stand
alone, you need to use Cross-over cable or build up LAN environment to use LAN cable.
3 Factory Default
Please refer to the following factory defaults to change setting up.
Factory Default
Admin ID root
Admin password root
IP address 10.20.30.40
Network mask 255.255.255.0
4 IP Assignment
FlexWATCH
TM
server can be configured by two different configuration method and
following is brief explanation.
Installation Wizard Program:
IP installation program is provided in CD form. Once FlexWATCH
TM
server is connected to
LAN network, you can assign IP address through program and access the Web browser
HyperTerminal mode:
If no network is available and you want to set up IP address, you can directly connect
FlexWATCH
TM
server to your PC through Serial cable provided together with product.
HyperTerminal mode is very useful tool to recover Admin password when you lost your
admin password or to report any problem to Manufacturer when product is on
malfunction status.
4.1 Through Installation Wizard Program
IP setting with Installation Wizard program is easy and simple way and after IP setting is
done you can do other configuration through web browser.
- INTPLUS [2005] -