Filter
Top Products
- 25 -
www.4XEM.com
Motion Detection
Enable motion detection: Check
this option to turn on motion
detection.
Click on this button to add a
new window. At most three windows
can exist simultaneously. Use the
mouse to click, hold, and drag the
window frame to resize or the title
bar to move. Clicking on the ‘x’ at
the upper right-hand corner of the
window to delete the window.
Remember to save in order to
validate the changes.
Click on this button to save the related window settings. A graphic bar will rise or fall
depending on the image variation. A green bar means the image variation is under monitoring
level and a red bar means the image variation is over monitoring level. When the bar goes red,
the detected window will also be outlined in red. Going back to the homepage, the monitored
window is hidden but the red frame shows when motion is detected.
Window Name: The text will show at the top of the window.
Sensitivity: This sets the endurable difference between two sequential images.
Percentage: This sets the space ratio of moving objects in the monitoring window. Higher
sensitivity and small percentage will allow easier motion detection.
The following figure shows the screen when
is clicked. The monitoring window has been
outlined in red and the graphic bar goes red since the goldfish is moving.