Filter
Top Products
- 27 -
www.4XEM.com
Time
Select Always or input the time interval.
Snapshot file name prefix
The prefix name will be added on the file name of the snapshot images.
Trigger
Event trigger type has digital input, motion detection and is sequential.
Digital input: Network Camera will send snapshots when the digital input is triggered.
*Note: Please configure Motion Detection first: There are three windows for motion
detection and each needs to be defined. Select the windows which need to be monitored. If
motion detection has not been set up, undefined will be shown instead of the window title. If
this happens, the window can be defined by clicking on Motion detection
and a note will show
to direct the user to the configuration page for motion detection setup.
Motion Detection
See Motion Detection (page 25) for set-up instructions.
Send pre-event image(s): The number of pre-snapshots that will be
captured and sent when a condition is triggered.
Send post-event image(s): The number of post-snapshots that will be
captured and sent when a condition is triggered.
Delay second(s) before detecting next motion: Set the time delay
before restarting to check on the triggering condition when the current
condition is triggered.
Sequential: Snapshot interval: second(s): The Network Camera will send snapshots at the
specified intervals to the external server using the method selected below. Remember: This
operation is still subject to the conditions set in the weekly schedule.
Send Snapshot By
Email: This selects the uploading method following the intervals set above. The snapshot
named “prefix-yyyymmdd-hhmmss.jpg” will be attached in the email.
FTP: The snapshots will be uploaded to the external FTP server with the file name defined in
the next option. This can also be used to refresh the captured images stored in the external
web server to build creative homepages.
FTP put snapshots with date and time suffix: This option sets up the snapshot capture