Filter
Top Products
ePhoto CL50 User’s Guide 49
Troubleshooting
The recorded
image is blurry.
The subject moved while you were taking
the picture. Hold the camera steady and take
the picture again.
You moved the camera while you were tak-
ing a picture. Take the picture again and hold
the camera steady as you depress the shutter
button.
You used the wrong focus setting.
Make
sure the subject’s distance from the lens and
the focus setting match. The flash illuminates
subjects up to a distance of only about 10
feet (2.6 m).
You manually set the shutter speed too low.
Increase the shutter speed manually.
The recorded
image is too
dark.
There was not enough light. Set the flash to
the Auto or Fill-in setting.
The subject was too far away for the flash.
The flash illuminates subjects up to a dis-
tance of only about 9 feet (2.8 m).
You selected an incorrect advanced setting.
Readjust the setting or set it to automatic.
You can also use PhotoWise to adjust the
brightness and contrast of your image.
Problem Possible Cause/Solution
CL50User Page 49 Wednesday, January 27, 1999 10:10 AM