Filter
Top Products
MAV Features continued
Depth-Tech - This on-screen feature displays depth of the MAV camera. Viewing fish and
structural -elements in relation to their exact depth greatly enhances the fishing experience.
PowerSpool Camera Control Switch – In addition to using the Footpad, the MAV camera
can also be lowered or raised using the UP and DOWN switch on the side of the
PowerSpool. This allows you to manipulate the camera by hand. NOTE: This is
especially handy when you are outside the boat, but wish to rewind extra cable
for securing the camera during transport.
Auto ON – MAV camera automatically turns Monitor POWER ON as soon as camera is lowered
from PowerSpool. It is not necessary to turn Monitor POWER on manually.
Auto OFF – MAV camera automatically turns Monitor POWER OFF two seconds after camera
has reached the PowerSpool housing. To turn PowerSpool off completely, simply press the
POWER button on the PowerSpool panel.
Auto UP Mode – Automatically retrieves the MAV camera from any depth. Press and hold
the UP button for 2 to 5 seconds, and release. PowerSpool should continue to retrieve MAV
camera until it reaches its housing.
Spectral Response (SR) Lights – Multicolored lighting system
filters out many of the suspended particles / plankton that appear
in the water column, particularly at night. Lights illuminate the
area directly in front of the camera, similar to your car’s headlights at night.
To turn on the SR lights, press and hold both the UP and DOWN buttons together until the
words “LED ON” appear on the lower left of monitor screen. To turn lights off, press and hold
UP and DOWN together until “LED OFF” appears on screen. When lights are on, a series of 11
red and blue LEDs should be visible. NOTE: SR lights will not turn on until the camera has
been deployed and monitor image appears.
Nature Vision, Inc. © 2006, Pg 9