21
T
T
R
R
O
O
U
U
B
B
L
L
E
E
S
S
H
H
O
O
O
O
T
T
I
I
N
N
G
G
Problem Possible cause Solution
The battery is depleted. Replace the battery with a new one.
The battery is inserted
incorrectly.
Check the battery’s polarity orientation.
The camera has no
power.
Is the camera connected to a
computer?
The camera’s buttons do not work when the
camera connects to a PC. Disconnect the
camera.
Is the camera turned on? The camera turns off automatically after
approximately one minute. Make sure the
camera’s power is turned on before taking an
image.
The camera won’t
capture an image.
Is the camera connected to a
computer?
The camera’s buttons do not work when the
camera connects to a PC. Disconnect the
camera.
Use the TWAIN driver utility to capture an image
while connected to a PC.
The images are
blurry.
The camera or subject was
moving when the image was
captured.
Hold the camera steadily to capture images. The
minimum focus distance is about two feet.
Objects closer than 2 feet will not be in focus.
The image is too
light.
You are facing a bright light
when taking the image.
Change the angle of the image so the bright lights
do not shine directly towards the camera lens.
FCC Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) this
device may not cause harmful interference. (2) this device must accept any interference received, including
interference that may cause undesired operation.
PRODUCT: 3-IN-1 Camera
MODEL: 16-3868
RESPONSIBLE PARTY:
RadioShack
300 RadioShack Circle
Fort Worth, TX 76102 USA
PHONE: 817-415-3200