Filter
Top Products
User Guide for DC2200
14
Status LCD flow chart :
1. Operating mode : Ready to take a photo.
Press
Power/Standby
button to turn on
the LCD.
Press Mode
button once
LCD displays full
segments. Ready to
operate.
‘FEA’
(feature) is
displayed in
the counter .
Press Select button to
change the quality :
FINE,NORM,ECON,
Zoom x2, Movie.
a.
If selected, press Mode button to
other setting, it will save the
quality option.
b. Or wait for timeout (10s), it will
save the quality option.
Display ‘NTSC’ in
the LCD left corner
Press Select button
to ‘PAL’
a.
Press Mode button to other
setting, it saves the PAL system
b. Or wait for timeout (10s), it
saves the PAL system.
c. Or press the power button to
standby mode, it will save the
PAL.
Press Mode
button
Display Rubbish
Bin in the LCD right
bottom corner
Press Select button
to do deletion of all
stored images
bSY is displayed. Waiting until
it goes back to operating mode
(counter is 0). It takes some
seconds.
If press Mode
button
If select item
‘a’ : Press
Mode button
It will go back to operating
mode (counter is ready)
a. Press Shutter button to take photo. Or
b. Press Power button to standby mode.
Press Select button.
The Timer icon is on.
Press Shutter button to take photo.
The timer is triggered. LED is blinking,
beeper is beeping. The photo is taken after
10s.
Press Shutter button
to take a photo.
‘bSY’ (busy) is
displayed for several
seconds.
If selected, press Mode button to other
setting, it will save the auto flash mode.
If select item a, press the Mode button.
Flash icon will blink.
Press the Select button to confirm.
Flash icon is then turned on.