Filter
Top Products
User Guide for DC2200
7
Connect the camera unit by USB cable.
1. First, the PC/Mac is installed with the My Camera driver (install the CD-ROM
will put the driver to your PC and double click the Mac driver Installer in the
Mac computer will start to install the My Camera driver ).
2. Then power on the camera unit. You can see the status LCD is on.
3. After connecting the USB cable, ‘PC’ is seen on the right corner of the LCD.
4. The My Camera explorer is placed in the My Computer folder. Double click on it
will open the explorer and you can see the image files.
Connect the PC and the camera with the USB cord.