Filter
Top Products
User Guide for DC2200
5
Battery Used for DC2200 Camera
l To power up the unit, the 3xAAA alkaline batteries should be put in the battery
compartment.
l Press the Power button.
l If the battery power is taken off, the internal memory is erased and the TV settings will be reset to
default.
• Make sure it is power up by the battery before you connect it to the PC with the USB cable.
• When connected to USB, the unit will not go to standby mode. You can take photo or
movie with USB cable connected to the PC in order to save battery power.
• You cannot take photo with the USB connected to the MAC unit.
The first segment of the battery icon will blink if battery power is too low.
Please change to new alkaline batteries as soon as possible. Always upload the images to
the computer by the time the battery low icon is prompted.
Push off the battery door and place the 3XAAA alkaline battery in correct polarity.