Filter
Top Products
12
When the camera is disconnected from the
computer, it will returns to DSC mode and auto
power off.
--> USB disconnect -->
- To turn off the camera, press and hold ON/OFF
button until the display on the LCD panel
disappears.
--> Press ON/OFF Button -->
Important: Before removing the batteries or
before the batteries ran out of charge, make sure
to transfer the pictures from the camera to the
computer or else the pictures will lost.
SXGA
Installing The Software
Insert the CD in you CD-ROM drive and the
application runs automatically. An interface
will appear. On the right of the interface, there
are four buttons.