Filter
Top Products
NetCamera NVW
A02-IPCAM4-W54 19
3.1.1 Windows 95/98/ME
1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Configuration tab.
2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface
Card (NIC) in your PC.
3. Click Properties.
4. Select the IP Address tab. In this page, click the Specify an IP address radio
button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).
3.1.2 Windows NT4.0
1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Protocols tab.
2. Select TCP/IP Protocol and click Properties.
3. Select the IP Address tab. In this page, click the Specify an IP address radio
button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).
3.1.3 Windows 2000
1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and Dial-up Connections.
2. Double-click LAN Area Connection.
3. In the LAN Area Connection Status window, click Properties.
4. Select Internet Protocol (TCP/IP) and click Properties.
5. Select Use the Following IP Address (EG IP=192.168.1.2 and subnet
Mask=255.255.255.0).
6. Click “OK” to finish the configuration.