Filter
Top Products
NetCamera NVW
A02-IPCAM4-W54 56
A.2 WEB
I cannot access the web configurator.
Steps CORRECTIVE ACTION
1
Make sure you are using the correct IP address of the
NetCamera NVW. Check the IP address of the NetCamera
NVW (192.168.1.1).
2
Ping the device (ping 192.168.1.1)
3
Reset the device
The web configurator does not display properly.
Steps CORRECTIVE ACTION
1
Make sure you are using Internet Explorer 5.0 and later
versions.
2
Make sure you are using Internet Explorer 5.0 and ActiveX is
installed.
3
Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and
then click
the Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the
version of your Internet browser.)
A.3 Login
If you forget the password to log in
Steps CORRECTIVE ACTION
1
The Reset function is to reset the setting back to factory
default setting, once you press the “RESET” button within 10
seconds.
2
Before configurating this device , you need to know
the
following default settings:
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0