Filter
Top Products
AXIS 212 PTZ - Technical Specifications
38
Technical Specifications
Item Specification
Model AXIS 212 PTZ Network Camera
Image sensor 3.1 Megapixel ½” Micron progressive scan CMOS
Lens Fujinon, F1.8, fixed iris
Horizontal viewing angle: 44º-140º
Vertical viewing angle: 35º-105º
Minimum
illumination
10 Lux Wide mode
20 Lux Tele mode
Video compression Motion JPEG
MPEG-4 Part 2 (ISO/IEC 14496-2) with motion estimation
Profiles: Advanced Simple Profile and Simple Profile
Resolutions 9 resolutions from 640x480 to 160x120 via API
6 selections via configuration Web page
Frame rate Up to 30 frames per second in VGA (Motion JPEG and MPEG-4)
Video streaming Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG-4)
Image settings Compression levels: 100
Configurable color level, brightness, sharpness, contrast, white balance, exposure control, fine tuning of behavior at low
light. Overlay capabilities: time, date, text
Shutter time 1/5 sec to 1/10000 sec
Audio Configurable for built-in or external microphone
Audio compression
- Audio stream from camera to client/application: AAC LC 8-32 kbit/s,
G.711 PCM 64 kbit/s, G.726 ADPCM 32 or 24 kbit/s
- Audio stream from client/application to camera: G.711 PCM 64 kbit/s
Half duplex, simplex or audio off
Audio alarm at configurable detection level
Security Multiple user access levels with password protection, IP address filtering, HTTPS encryption
Users 20 simultaneous users
Unlimited number of users using multicast (MPEG-4)
Alarm and event
management
Events triggered by built-in multi-window motion detection, audio detection, external inputs or according to a
schedule
Image upload over FTP, email and HTTP
Notification over TCP, email, HTTP and external output
Pre- and post alarm buffer of 9 MB (approx 5 min of 320x240 resolution video at 4 frames per sec)
Pan/Tilt/Zoom 3x instant zoom
± 70º instant pan
± 52º instant tilt
Pan/Tilt/Zoom speed Pan and Tilt: Better than 400º/second
Zoom: Better than 0,1 second (max wide to max tele)
Connectors Ethernet 10BaseT/100BaseTX, RJ-45
Mini DC power jack
Terminal block for 1 alarm input and 1 output
3.5 mm jack for Mic in (max 80 mVpp) or Line mono input (max 6.4 Vpp),
3.5 mm jack for Line mono output (max 1.3 Vpp) to active speaker
Processors, memory,
clock
CPU, video processing and compression: ARTPEC-A
RAM: 32 MB, Flash: 8 MB
Battery backed-up real-time clock
Power 5 V DC max 3.6 W, or Power over Ethernet (IEEE 802.3af) with power classification: Class 1 (max 3.84 W)
Operating conditions 5 – 40º C (41 – 104 ºF)
Humidity 20 - 80% RH (non-condensing)
Installation,
management and
maintenance
AXIS Camera Management tool on CD and Web-based configuration
Configuration of backup and restore
Firmware upgrades over HTTP or FTP, firmware available at www.axis.com