Filter
Top Products
AXIS 225FD Installation Guide Page 7
ENGLISH
DEUTSCH
ESPAÑOL
ITALIANO
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 225FD.
Automatic discovery
1. Check that the AXIS 225FD is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 9 for instructions on how to assign the password.
Assign the IP address manually
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button Assign new IP address using serial number and enter the serial
number and IP address for the AXIS 225FD. The serial number is located on the product
lab
el.
3. Click the Assign bu
tton and follow the instructions.
4. Click the Home P
age button to access the camera’s web pages.
See page 9 for instructions on how to set the password