Filter
Top Products
AXIS Q6045-E Mk II PTZ Dome Network Camera
Events
- Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback.
This can for example be used to send notications.
- Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 32.
- Shock Detection – Trigger the rule when the Axis product detects it has been tilted or hit. See Shock Detection
on page 32.
- Enter/Exit – Trigger the rule when an object has entered or exited the area. See Enter/Exit Detector on page 34.
- Fence Detector – Trigger the rule when an object has crossed a virtual line. See Fence Detector on page 35
- Object Removed – Trigger the rule when an object has been removed from a scene. See Object Removed
on page 33.
• Hardware
- Casing Open – Triggers the rule if the casing of a connected external device, such as a junction box or cabinet
(not included), is removed or opened. This can for example be used to send notications of maintenance or
unauthorized tampering.
- Fan – Trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance
notications.
- Heater – Trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance
notications.
- Network – Trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This
can for example be used to send maintenance notications.
• Input Signal
- Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on
the Live View Page on page 11. This can for example be used to validate actions during product installation
and conguration.
- Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for
example, be connected to buttons in the VMS user interface.
• PTZ
- Autotracking – Trigger the rule when autotracking starts or stops. See Autotracking on page 27.
- Error – Trigger the rule if the PTZ functionality is not working correctly. This can for example be used to
send maintenance notications.
- Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
- Ready – Trigger the rule when the PTZ functionality is ready to be used. This can for example be used to steer
the camera to a specic preset position when the product is started.
• Storage
- Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable,
removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance
notications.
40