Filter
Top Products
Page 16 AXIS M10 Series
Wireless Settings
1. Select an access point or ad-hoc device under Status of Wireless
Networks; some of the required information will automatically be
entered under Wireless Settings.
2. SSID is the name of the selected wireless network. Leave this field
blank if AXIS M1011-W/M1031-W is to access the nearest
unsecured network.
3. Network type - select Master to access the network via an access
point or Ad-hoc to access any other wireless device and create a
local network (see note below).
4. Security - select one of the following methods:
• WPA-/WPA2-PSK
• WPA-/WPA2-Enterprise - see instructions below
• WEP - see instructions below
• No security (not recommended)
Keys, passphrases and certificates that are used for security must be
entered manually. To retrieve the necessary details, contact the Network
Administrator for the selected access point or ad-hoc device.
5. Click Save.
Note: Ad hoc mode allows users to form a wireless LAN without
connection via an access point. The camera can, for example, con-
nect point-to-point to a laptop with wireless network support. Ad-
hoc connection may be useful in certain installations but is not the
recommended method.
WPA-/WPA2-PSK - Enter the required Pre-shared Key for the access
point, which can be a hexidecimal number (Manual hex) or a passphrase.
WPA-/WPA2-Enterprise - Choose the type of client/server authentication
being used by the access point; EAP-TLS.