Filter
Top Products
AXIS M10 Series Page 19
ENGLISH
Other methods of setting the IP address
Resetting to the Factory Default Settings
To reset all parameters and the IP address to Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the Control button pressed until the Status indicator flashes
amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicator displays
green (which can take up to 1 minute) the process is complete and
the camera has been reset.
Use in
operating
system
Notes
UPnP™
Windows
(ME or
XP)
When enabled on your computer, the camera
is automatically detected and added to “My
Network Places.”
Bonjour
MAC OSX
(10.4 or
later)
Applicable to browsers with support for
Bonjour. Navigate to the Bonjour bookmark
in your browser (e.g. Safari) and click on the
link to access the camera’s web pages.
AXIS Dynamic
DNS Service
All A free service from Axis that allows you to
quickly and simply install your camera.
Requires an Internet connection with no HTTP
proxy. See www.axiscam.net for more
information.
ARP/Ping
All See user’s manual. The command must be
issued within 2 minutes of connecting power
to the camera.
View DHCP server
admin pages
All To view the admin pages for the network
DHCP server, see the server’s documentation.