Filter
Top Products
13
AXIS M32 Series
Video settings
This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access
to all the configuration menus accessed through the Setup link at the top right-hand corner of the Live View page; and
Operators, who have access to the settings for Basic Setup, Video and Events. Click on this page to access the online
help that explains the setup tools.
Video Stream
The video stream settings are separated into 3 different
tabs:
•Image
• H.264
•MJPEG
Image
Image Appearance
Use these settings to modify the image resolution and
compression. Setting the compression level affects the
image quality and the amount of bandwidth required,
the lower the compression, the higher the image quality
with higher bandwidth requirements. The image can also
be mirrored (reversed) and rotated.
See the online help files for more information.
Video Stream
To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited
radio button to allow the highest available frame rate or select the Limited to... radio button and enter a value (1-30) fps in
the field.
Overlay Settings
Use these settings to include an text, date, and time as overlay.
Click for information on available options.
Preview
For a preview of the image before saving, select video format
and Open. When satisfied with the settings, click Save.
H.264
GOV Settings
The GOV structure describes the composition of the video
stream and setting the GOV-length to a higher value saves
considerably on bandwidth but may have an adverse effect on
image quality.
Text, date & time overlay