Filter
Top Products
24
AXIS M32 Series
Camera tampering
The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered,
sprayed, or severely defocused.
First, you must create an event, see How to
set up a triggered event, on page 22, for the camera to send an alarm.
Settings
The Minimum duration parameter sets the minimum tampering period, that is, an alarm will not be triggered until this period
has elapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that
affect the image.
If the camera lens is sprayed or covered so that the camera live
view becomes dark, it will not be possible to distinguish this
situation from other situations where the same effect is seen, such as when lighting conditions change. When the Alarm for
dark images parameter is enabled, alarms are generated for all cases where the lights are either dimmed or turned off, or if
the lens is sprayed, covered, or rendered severely out of focus. If not enabled, no alarm is sent.
After you define these settings, click Save.