Filter
Top Products
AXIS P1346 Network Camera
Events
Events
The Axis product can be configured to pe rform actions when different events occur, for example, start a recording when m otion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications,on page 34.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see Audio detection, on page33.
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, onpa ge 31.
- Tampering — trigger the rule when tamp ering is detected, see Camera Tampering,on page 31.
• Hardware
- Network — trigger the rule if network connection is lost o r restored. This can for exam ple be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when a n I/O port receives a signal from a connected device, see I/O
Ports, on page 48.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View page, on page12. This can for example be used to validate actions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a P TZ operation.
- Preset Reached — trigger the rule when the camera
stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset p ositio n .
• Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigge r the rule whe n the storage d evice is full. Under normal operation, the oldest recordings will be
overwritt
en to prevent the storage device from becoming full.
- Locke
d —triggertheruleifthestoragedeviceislocked(writeprotected).
• S
ystem
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notifi
cation when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see Recurrences, on page 37. This can for example be used to upload
an image every 5 minute s.
- Use Schedule — trigger the rule according to the se lecte d schedule, see Schedules, on page 37.
Available actions include:
35