Filter
Top Products
AXIS Q1602 N etwork Camera
Accessing the Product
TheLiveViewPage
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile . Stream
profiles are configured under Video & Audio > Stream Pro files.See
Stream Profiles, on page 17
.
Click Pulse to activate the output for a defined period of time, such as sw itching on an exte rnal light for 20 seconds.
Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external light
on and off.
The Manual Trigger button is used to trigger an action rule from the Live View page, see .
Click Snapshot to save a s napshot of the video image. Right-click the v ideo image to save it in JPEG format on your
computer. This button is p rimarily intended for use when the AXIS Media Co ntrol viewer toolbar is not available.
Enable this button from Live View Config > Action Buttons.
The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the aud io
clip and click the Play button.
AXIS Media Control viewer toolbar
The AXIS Me dia Control viewe r toolbar is available in Internet Explorer only. See
AXIS Media Control (AMC), on page 12
for more
information. The toolbar displays the following buttons:
The Play button connects to the A xis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The locationwheretheimageissavedcanbespecified
in the AMC Control Panel.
Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record the curr ent vide o s trea m . The lo ca tion where the recording is saved ca n be s pecified
in the AMC Control Panel.
AMC Audio Controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when
audio is enabled.
10