Filter
Top Products
AXIS Q7424–R Mk II Video Encoder
Hardware Overview
Hardware Overview
1
2
3
4
5
6
7 8 9 10 11 12 13
1
LED indicator power
2
LED indicator status
3
LED indicator network
4
Mounting holes
5
Video input connectors
6
SD memory card slot
7
I/O connector
8
Audio connectors
9
SFP connector
10
RS485/RS422 connector
11
Control button
12
Power connector
13
Network connector (PoE)
Connectors and Buttons
For technical specications, see page 61.
BNC Connector
Each video input is terminated using a coax/BNC connector. Connect a 75 Ohm coaxial video cable; the recommended maximum
length is 250 m (800 ft).
Note
75 Ohm video termination can be enabled/disabled for the video input through the product's web page at Video & Audio >
Camera Settings > Video termination. This termination is enabled on factory default. In cases where the product is to be
connected in parallel with other equipment, for optimum video quality, it is recommended that termination be enabled for
only the last device in the video signal chain.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
7