BenQ HDR-16EP Security Camera User Manual


 
40
for retrieving purpose in the future. Insert the new removable hard disk (purchased
from the dealers authorized by Hung Electronic USA, Inc.) and lock the hard drive
with key. Turn on the power switch. The system will recognize the new disk and
request to format it. Click “Yes” to accept disk formatting which will take less
than one minute. The system will re-boot and enter in the normal recording mode.
4-8-1If the new hard disk is inserted to the system
HDR-16EP supports 2 Hard Disk. If you insert the New HD(either 1 HD or 2 HD)
into the system, after system booting, it will show the figure as follows.
Attention: If there is any old HD(w/ recorded data inside) inserted into the system,
it won’t show the figure above. Please refer to the following section 4-8-2 for the
old HD operation.
1.
Click the “Disk Management”, it will show the figure as follows.
Remark: The following figure takes “insert 1 new HD” as an example.
Selection Icons