Filter
Top Products
41
2. Click “
Format” on the right of the screen, then system will start to format the
new hard disk.
After finishing the format, the “selection icons” will become “available”.
Please refer to the figure below. Use the “selection icons” to choose the cameras
you would like to be recorded in this new formatted HD.
Click the “save” icon on the bottom right of the screen, then the system will
reboot automatically and enter the monitoring screen.
3. If you insert 2 new HD at the same time, the operations are similar to the
procedures above. After formatting, it will show the figure as follows. Please
use “Selection Icons” to split the cameras to two new formatted HD, then
press the “Save” icon to reboot the system as the procedure 2 above.
Selection Icons
“Save” Icon