Filter
Top Products
Dinion
XF
| Installation Manual
Bosch Security Systems | 2004-01 | V1.0
EN | 12
Mounting the camera
The camera can be mounted from the top or bottom. The bottom
mounting is isolated from ground. With outdoor scenes, a DC-iris lens is
recommended.
Day/Night switching
The Dinion
XF
Day/Night Camera is equipped with a motorized IR filter.
The IR filter can be removed in low-light or IR illuminated applications.
If Auto switching mode is selected, the camera automatically switches the
filter depending on the observed light level. The switching level is
programmable. In Auto switching mode the camera prioritizes motion (the
camera gives sharp images without motion blur as long as the light level
permits) or color (the camera gives color pictures as long as the light level
permits). The camera recognizes IR illuminated scenes to prevent
unwanted switching to color mode.
There are four different methods of switching:
• via the alarm input,
• via Bilinx™ communication,
• as part of the programmable mode profile, or
• automatically, based on the observed light levels.
Caution
Do not point the camera/lens into direct sunlight.
DinionXFD_Nv1_0.book Page 12 Friday, January 7, 2005 10:56 AM