Bosch Appliances NDN-932 Security Camera User Manual


 
FLEXIDOME HD Installation | en 27
Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10
5.4 Mount the camera module
1. Route the cable tree from the camera around the rear of
the camera module and secure all cables.
2. For surface mounted units, place the surface mount ring
over the mounting base.
With a side connection, remove the tab at the side
entrance; with a rear connection, leave it in place.
3. Use the fixing ring to secure the camera module to the
mounting base:
Align the screws in the fixing ring with the raised
holes in the mounting base.
Tighten the three screws with the supplied
screwdriver bit (maximum torque 1 N-m).
x3 x3
> 1 N-m > 1 N-m