Filter
Top Products
FLEXIDOME HD Installation | en 35
Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10
4. Briefly press the Menu button to start the automatic
motorized back focus (Auto MBF) adjustment.
– You will hear the motorised automatic back focus
process running.
– The progress is shown on the monitor.
5. If the camera is not correctly focussed, press the Menu
button for a longer time to restart the wizard.
6. If the camera is correctly focussed, briefly press the Menu
button to save the results.
– The back focus position is stored.
– The iris is set to its original value.
5.10 Closing the unit
When the camera position is set and all adjustments have been
made, close the unit.
1. Disconnect the temporary external network cable.
2. Reconnect the internal network cable.
3. Place the camera window section on the camera module
and ensure that:
– the connecting wires are not trapped or
disconnected,
– the rubber gasket fits snugly.
4. Using the supplied screwdriver bit, secure the camera
window section to the camera module by tightening the
two screws (maximum torque 3.5 N-m).