Filter
Top Products
10 en | Advanced Setup AutoDome 100 Series Fixed Camera
F.01U.216.346 | 1.0 | 2011.04 User Manual Bosch Security Systems, Inc.
3. Only available in Day/Night version cameras, color versions show NightSense.
4.2.4 ALC -> SHUTGAIN -> DAY/NIGHT Submenu
NIGHTSENSE AUTO, OFF, FORCED – UTO mode: Camera automatically
switches to NIGHTSENSE in low light
conditions.
– OFF mode: NIGHTSENSE is turned off.
– FORCED mode: The camera is set to
NIGHTSENSE (black and white) mode.
EXIT Returns to the ALC menu.
Function Selections Description
NOTICE!
If SensUp is active, some noise or spots may appear in the picture. This behavior is normal.
SensUp may cause some motion blur on moving objects.
Depending on the camera GAIN setting, unrelated menu items are not active.
Function Selections Description
DAY/NIGHT AUTO, COLOR, MONO – AUTO: Switches the filter between COLOR
and MONO depending on the scene
illumination level.
– COLOR: Use for normal daylight conditions.
– MONO: Removes the IR filter, providing full IR
sensitivity.
SWITCH LEVEL (-15 to +15) Sets the video leveling threshold when the camera
switches to monochrome operation.
PRIORITY COLOR, MOTION in AUTO mode:
– COLOR: Displays a color image as long as the
light level permits.
– MOTION: Avoids motion blur as long as the
light level permits.
IR CONTRAST NORMAL, ENHANCED – NORMAL: Optimizes contrast in monochrome
applications with visible light illumination.
– ENHANCED: Optimizes contrast in
applications with high IR illumination levels.
MONO BURST ON, OFF – ON: The color burst remains active, even in
Monochrome mode.
– OFF: The color burst in the video signal is
switched OFF in Monochrome mode.
EXIT Returns to the SHUTGAIN menu.
NOTICE!
Depending on the camera’s DAY/NIGHT setting, unrelated menu items are not active.