Filter
Top Products
AutoDome 100 Series Fixed Camera Advanced Setup | en 13
Bosch Security Systems, Inc. User Manual F.01U.216.346 | 1.0 | 2011.04
4.3.1 Install Menu
4.3.2 CAMERA ID Submenu
Function Selections Description
CAMERA ID Selects submenu Accesses the Camera ID submenu.
SET FOCUS NOW Completely opens the lens iris for best focus. The
recommended focus procedure is:
– Unlock the focus locking screw.
– From the INSTALL menu highlight SET FOCUS
NOW.
– Turn the lens focus adjustment as required
– Tighten the lens focus locking screw.
– Exit the menu selection.
COMM ON, OFF Turns on Bilinx communication. See notice below.
SYNC Selects submenu Accesses the synchronization functions.
DEFAULTS Selects submenu Returns all settings for all modes to their default.
EXIT Exits this menu.
NOTICE!
When using Bilinx control, the COMM ON/OFF menu selection is not active. This function can
be accessed only through the camera menu keys when the CTFID software is not actively
running.
Function Selections Description
CAMERA ID Selects submenu To enter up to a 17-character camera name:
– Press the Menu Select key to enter the Camera ID
string.
– Enter up to a 17-character string name for the camera.
– Use the Up and Down keys to select a character.
– Use the Left and Right keys to change position in the
string.
– Press the Menu Select key to save and to exit the
character string.
– Exit the Camera ID menu.
ID POS OFF, TOP, BOT Use left or right keys to select:
OFF: Camera ID not displayed.
TOP: Camera ID displayed at upper left corner of display.
BOT: Camera ID displayed at lower left corner of display.
(The camera ID is not displayed when the OSD menu is
open.)
EXIT Returns to the INSTALL menu.