Filter
Top Products
AutoDome 100 Series Fixed Camera Advanced Setup | en 7
Bosch Security Systems, Inc. User Manual F.01U.216.346 | 1.0 | 2011.04
4 Advanced Setup
The VG5-100 Series camera module normally provides an optimal picture without the need for
further adjustments. Advanced setup options, however, are available for obtaining the best
results from the camera under special circumstances. There are two upper level On-Screen
Display (OSD) menus: the Main menu and the Install menu.
The Main menu allows you to select and setup the picture enhancement functions. The Install
menu allows you to set the camera ID, focus and synchronization settings. The Main and
Install menus have settings that you can select directly or open to submenus for a more
detailed setup.
4.1 Accessing and Navigating Menus
There are five (5) keys used for navigating through the various menus. To access the setup
menus, press the center Select key to open and display the Main menu. Use the four
directional keys to navigate through the menus.
Figure 4.1 Menu Keyboard and Monitor Jack
Use the menu keys to perform the following:
– To access the Main menu or to select a sub-menu item, press the center Menu Select key.
– To open the Install menu press the Menu Select key for approximately 1.5 seconds.
– To scroll up or down a menu press the Up or Down keys.
– To move through options or to set parameters, press the Left or Right keys.
NOTICE!
Active menu selections can vary depending or the combination of camera, CPU and COMM
(communication) modules used. The menu selections described in this manual are typical for
a VG5-100 Series system.
Ref Description Ref Description
1 Menu Keyboard 5 Select Button
2 Monitor Jack 6 Right Button
3 Up Button 7 Down Button
4 Left Button