Filter
Top Products
VideoJet X10 SN Appendix | en 107
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
8.4 LEDs
The VideoJet X10 SN network video server has a number of LEDs on its front and rear panels
that show the operating status and can give indications of possible malfunctions:
ETH LED
Connect LED
CF LED
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Lights up red: Startup in progress.
Lights up green: Startup complete, VideoJet X10 SN is operational.
Flashes green: Video connection established.
Flashes red: VideoJet X10 SN is faulty, for example following failed
firmware upload.
Flashes orange: Activity on CF card.