Filter
Top Products
76 en | Configuration Using a Web Browser VideoJet X10 SN
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
5.38 Advanced Mode: Network
The settings on this page are used to integrate the VideoJet X10 SN into an existing network.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1. Make the desired changes.
2. Click the Set and Reboot button. The VideoJet X10 SN is rebooted and the changed
settings are activated.